TFT100 Security info

From Wiki Knowledge Base | Teltonika SAS
Main Page > SAS Micro Mobility > TFT100 > TFT100 Configuration > TFT100 Security info

In security section user can see SIM card security information, "Teltonika" Configurator Keyword security information and SSL/TLS Certificate information.

SIM Card

GH5200 SimCard.PNG

The state and status of currently connected SIM card can be observed here. If a SIM card with PIN code is used, user can enter it in this section. The remaining attempts to enter PIN code are shown as well. When SIM PIN code is entered correctly user can change PIN code or disable it from the SIM card. When SIM PIN is disabled and user would like to enable it again, user must enter the previously used PIN code.

Keyword Settings

GH5200 Keyword.PNG

Configuration security keyword can be set to configurator. Keyword can be saved in configuration file (.cfg), so there is no need to connect the device to the configurator to configure the keyword. Minimum keyword length is 4 symbols and maximum length is 10 symbols. Only uppercase and lowercase letters and numbers are supported. Keyword can be configured to .cfg configuration file when the device is not connected.


GH5200 Certificates.PNG

TFT100 can use digital certificates for authenticated access to secured network services.
Supported certificates file types: *.pem, *.pem.crt, *.key

NOTE! These features will only show up in configurator when device is connected to a computer.