Movement event configuration example

From Wiki Knowledge Base | Teltonika SAS
Main Page > SAS Personal Trackers > GH5200 > GH5200 Configuration > GH5200 Configuration examples > Movement event configuration example

Movement Event[edit | edit source]

GH5200 Movement Event.png

Movement Event scenario makes an eventual high priority record (and sends an optional SMS) when the device is stationary or in motion (depending on configured "Mode") for set Timeout.
Timeout is a configured amount of time (in seconds) after which an eventual high priority record is generated.
Movement Event mode generates a record after the start of movement whereas No Movement Event generates a record after the stop of movement.

NOTE! In case if No Movement Event is selected as Mode, then Pre Alarm Timeout is counted additionally.