GH5200 User interface

From Wiki Knowledge Base | Teltonika SAS
This is the approved revision of this page, as well as being the most recent.
Main Page > SAS Personal Trackers > GH5200 > GH5200 Configuration > GH5200 User interface


Indication is configurable in User Interface tab of configurator or via SMS/GPRS parameter ID. Each 100 ms device checks if any indication is enabled in response to triggered scenarios. If two scenarios need to indicate on the same indication source (LED or Vibration) then the active indicating scenario needs to be finished first (with exception of Alarm and Device Off scenarios, which can override the control of indication sources). Period setting is indicative of Periodic scenarios and if Period is set to 0 the indication will take place immediately. When indication is periodic and On parameter value is set to 0, the indication source will stay on until the scenario is finished. Triggered scenarios will turn on LED and/or Vibration for a configured On duration and then keep them off for a configured Off period of time. In case the configured Repeat value is higher than 0 the device continues a periodic on/off cycle. Enable In Sleep parameter will let the indication work while device is sleeping.

GSM Indications

GH5200 GSM Indication.PNG

Name Meaning
GSM Error SIM is not inserted, failed to connect to GSM operator or GSM signal is being jammed
GSM Signal Established Device successfully registered to GSM network
SMS Send/Receive SMS is received or sent
Incoming Call Device notices incoming call
Call Active Active voice call
Outgoing Call Device notices outgoing call
Remote Connection Device establishes connection with the server


GNSS Indications

GH5200 GNSS Indication.PNG

Name Meaning
No GPS Fix Device searches for valid GPS fix
GPS Fix Device has valid GPS fix


Event Indications

GH5200 Event Indication.PNG

Name Meaning
Event Eventual record is saved
Panic Event Panic record is saved
Device Off Device is turning off
Device On Device is turning on
Pre Alarm Indication when Man-down event functionality starts counting timeout till event
ManDown Man-down event indication
I Am Alive Periodical indication that device is on
Sleep Mode Device is in sleep mode
No Movement Pre Alarm Indication when No Movement event functionality starts counting timeout till event


Battery Indications

TMT250 Battery Indication.PNG

Name Meaning
Charging Device is charging
Fully Charged Device is fully charged
Charging Error An error occurred while charging
Battery Low Device battery is low


Keyboard Indications

GH5200 Keyboard Indication.PNG

Name Meaning
Alarm Key Pressed Alarm button is pressed and held down
Alarm Key Action Activated Configured functionality was activated by pressed Alarm button
Alarm Key Action Deactivated Configured functionality was deactivated by pressed Alarm button
Power Key Pressed Power button is pressed and held down
Power Key Action Activated Configured functionality was activated by pressed Power button
Power Key Action Deactivated Configured functionality was deactivated by pressed Power button
Key 1 Pressed Button 1 is pressed and held down
Key 1 Action Activated Configured functionality was activated by pressed button 1
Key 1 Action Deactivated Configured functionality was deactivated by pressed button 1
Key 2 Pressed Button 2 is pressed and held down
Key 2 Action Activated Configured functionality was activated by pressed button 2
Key 2 Action Deactivated Configured functionality was deactivated by pressed button 2
Key 3 Pressed Button 3 is pressed and held down
Key 3 Action Activated Configured functionality was activated by pressed button 3
Key 3 Action Deactivated Configured functionality was deactivated by pressed button 3


Default Configuration LED indications

Name LED, Color & Additional indication
GSM Error GSM
Incoming Call GSM, Vibration
Call Active GSM
Outgoing Call Battery
Remote Connection GSM
No GPS Fix GNSS
GPS Fix GNSS
Device Off Battery, Vibration, Audio
Device On Battery, Vibration, Audio
Man Down GSM
I Am Alive GNSS
Charging Battery
Fully Charged Battery
Charging Error Battery
Battery Low Battery
Alarm Key Pressed GNSS
Power Key Pressed GNSS
Key 1 Pressed GNSS
Key 2 Pressed GNSS
Key 3 Pressed GNSS

Note! Two LED colors are available - Green and Red. Indications are fully customizable depending on the user needs.