GH5200 Firmware Errata

From Wiki Knowledge Base | Teltonika SAS
This is the approved revision of this page, as well as being the most recent.
Main Page > SAS Personal Trackers > GH5200 > GH5200 Firmware Errata

Introduction[edit | edit source]

We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world. This document describes GH5200 devices firmware improvements, changes, new features implementations as well as current firmware release version.


Firmware versioning[edit | edit source]

  • Structure
 FMB.VER.[XX].[YY].[ZZ].Rev.[##] _ID[###]
  • Syntax description
    • XX – major FW version.
    • YY – branch number - shows major changes in firmware, i.e. new module support added or new major feature added.
    • ZZ – major changes like bigger fixes, improvements and new features addition.
    • ## – minor changes like small fixes and improvements.
    • ID[###] – Spec ID KEY – Specific clients FW ID.


Firmware versions[edit | edit source]

FIRMWARE VERSION RELEASE DATE CHANGES
55.00.05.Rev.00
(Current firmware release version for GH5200)
2020.02.24
  • Reworked User Interface configuration.
  • Reworked Keyboard configuration.
  • Implemented Event Notificiation panel.
  • Implemented Call After Answer functionality
  • Implemented User ID functionality.
  • Implemented On Demand data acquisition functionality.
  • Implemented Buttion IO Feature.
  • Optimized wake up from deep sleep by movement.
  • Updated default settings.
  • Improved BLE compatibility with beacons.
03.21.04.Rev.82 2019.05.15
  • Added new flash support.
  • Changed keyboard action default values.
  • Fixed LED indication.
  • Added incoming calls termination.
03.21.03.Rev.79 2019.02.24
  • Fixed GNSS fix indication.
  • GSM established indication changed to one time.
  • Added GSM signal established indication.
  • Suspended all indication when button is pressed.
03.21.03. Rev.75 2019.02.21
  • Fixed Alarm SMS template values.
  • 1st or 2nd function will be triggered when some action is selected.
  • Added Key Tones when sms key combination is entering.
  • Ported some AVR functionalities to base.
  • Critical Shutdown changes.
  • Fixed Autogeofence when fix is lost.
  • Fixed GPS fix indication.
  • Fixed ManDown vertical position.
  • Disabled Vibro indication on Sleep.
  • Fixed SMS sending method.
  • Separeted Call and Hang up functions.
  • Added GPS control workaround using cold start condition.
  • Fixed power on/off sms value, SMS PreAlarm sound indication.
  • DeadMan timer fix when value equals 0. Fixed recover of periodic indication when it was interrupted by higher priority indication.
  • Fixed Device Turn On indication.
  • Fixed Audio parameter after reset.
  • Fixed Call predefine list.
03.21.03.Rev.69 2018.12.11
  • Turn on speaker in outgoing call.
  • Changed Keyboard function indication logic.
  • Fixed call action on spy.
  • DeadMan counting in Deep Sleep.
  • Increased power off timeout by 3s if buttons' functions time sum is more than 7s.
  • Added %val to default SMS templates.
  • Fixed switching between Charging and Normal modes.
  • Added SMS text template %param'id'.
  • Added %val to default SMS templates.
  • Fixed speaker issue on CALL command.
  • Fixed ManDown PreAlarm indication.
  • Added server ACK and SMS Pre Alarm indications.
  • Fixed battery current measurement.
  • Improved Alarm Sending method scenario. Now sms will be send after server error.
  • Added Power OFF as keyboard action.
  • Fixed %op sms template.
  • Enabled GSM registering indication when status is not registered.
  • Improved keyboard tone indications.
  • Fixed ManDown, DeadMan and Movement Event priority max values.
  • Added %fixtime and %fixdate to sms text template.
  • Fixed "Movement Event" issue.
  • Aded "DeadMan" functionality.