1-Wire Temperature sensor
Introduction to the product
Compatible with: | TFT100 |
One of the implemented features for fleet management devices is a 1-Wire data protocol, which enables the connection of temperature sensors. It is a perfect accessory for temperature monitoring.
|Wiring||Yellow wire – 1-wire data, Red wire - 1-wire Power, Black wire - ground.|
|Power Supply||3V - 5,5V. Can be Powered from Data Line (parasitic connection)|
|Accuracy||±0.5°C (-10°C to +85°C)|
|Temperature range||-55°C to 125°C (-67°F to +257°F)|
|Cable length||8 meters|
|Serial Code||Unique 64-Bit|
|No External Components Required|
|Stripped & Tinned Terminal|
To connect the 1-wire temperature sensor you have to make sure to connect 3 PINs of the sensor to the PINs of your device correctly. Up to 4 sensors can be connected to our devices simultaneously.
|PIN NUMBER||PIN NAME||
|1||1-wire Data||Outputs temperature data via 1-Wire interface|
|2||1-wire Power||Power supply for the sensor (can be left disconnected in parasitic connection)|
The device reads the sensor data automatically after the sensors are connected, however, the I/O elements are disabled by default to save data. To receive data to the server, make sure that the appropriate I/O elements(Dallas Temperature # / Dallas Temperature ID #) are enabled.
The first ID is the sensor that is connected first, which can be changed from the software side without disconnecting the sensors. It can be done by navigating to the 1-Wire section and assigning the IDs of the sensors in your desired order.